Dead by Daylight Vendex External Cheat
If you'd like to purchase it, you can do so from this link: Buy Now.
If you are using external spoofer. Always run the cheat first and then the spoofer. If you run the spoofer first and then the cheat, you will get banned.
External products are better for undetection.
Product does not have spoofer. This means if you got banned you will get hwid banned.
If you want to purchase spoofer, you can do so from this link: Buy Now.
Supported Windows Versions
- Windows 11 — 23H2, 24H2, 25H2 (fully supported)
- Windows 10 — 22H2 (limited compatibility; technical support no longer provided)
Required Files
Download all required files before starting:
Required Settings
Before running the loader, make sure the following are configured:
- No third-party mirrors — download only from your dashboard
- Antivirus and Windows Firewall temporarily disabled
- Vulnerable Driver Blocklist disabled
- Virtualization (VT-x / SVM) disabled in BIOS
Setup Instructions
Step 1: Prepare Windows
Confirm your Windows version, install the official Microsoft runtimes (Visual C++ + DirectX), and check the required Windows/BIOS settings above.
Step 2: Download from Your Dashboard
Use only the download attached to your purchased product. Avoid mirrors, reuploads, and files sent by other users.
Step 3: Extract Into Its Own Folder
Do not run the executable from inside the archive. Extract every file together into a new, empty folder first.
Step 4: Temporarily Disable Security Protection
Before opening the executable, temporarily disable your antivirus protection and Windows Firewall. Re-enable both when you have finished using the loader.
Step 5: Run as Administrator
Fully close Dead by Daylight and any launcher (Steam / Epic), right-click the loader executable, and choose "Run as administrator".
Step 6: Enter Your License Key
Wait for the loader to finish updating, then paste the key exactly as shown in your dashboard and press Enter.
Step 7: Choose Your Product
Select Dead by Daylight Vendex in the loader. Leave the window open while the loader completes its checks and prepares the product.
Step 8: Follow the Ready Prompt
Continue only after the loader reports success or tells you to launch. If it shows an error, stop and check the Troubleshooting section below.
Usually takes 5–10 minutes.
Troubleshooting — Loader Error Codes
Search the wording shown in the loader. Start with the recommended action and stop after one clean retry. Categories: Permissions · System · Driver · Files · Hardware · Account · Service.
Permissions
Administrator privileges required — Error_Admin
Close the loader. Right-click the extracted loader file and select "Run as administrator", then approve the Windows prompt. Do not run it directly from WinRAR or another archive.
System
Virtualisation is Enabled, Please Disable this in the BIOS Settings — Error_MemoryIntegrityChecks
Disable CPU virtualization in BIOS/UEFI. On Intel: turn off Intel Virtualization Technology (VT-x). On AMD: turn off SVM Mode. Save BIOS changes, boot back into Windows, and retry.
Global initialization failed — Error_GlobalInit
Close the loader, restart Windows, re-extract the latest dashboard download into an empty folder, and run it as administrator. If it repeats, include the time the error occurred in your ticket.
Code Integrity module error — Error_CIModule
The loader could not read the Windows Code Integrity component. Install pending Windows updates, restart, and confirm your build is listed as supported. If it repeats, include winver output in your ticket.
Code Integrity address resolution failed (Stage 1/2) — Error_CI_Address1 / Error_CI_Address2
Install pending Windows updates, restart, and check your Windows build is supported. Include a winver screenshot in your ticket if it repeats.
IP Helper API initialization failed — Error_IPHLPAPI
Press Win + R, open services.msc, and confirm the IP Helper service is running. Restart the service or restart Windows, then retry on your normal connection (no VPN).
System time validation failed — Error_Time
Open Settings → Time & language → Date & time. Enable Set time automatically and Set time zone automatically, click Sync now, then reopen the loader.
Game is already running — Error_GameRunning
Exit Dead by Daylight and its launcher completely. Check Task Manager for leftover game processes. End only that process (or restart Windows) before reopening the loader.
Unsupported Windows version — Error_WindowsVersion
Press Win + R, run winver, and compare your version/build to the supported list above. Install Windows updates and restart. Insider / preview / obsolete builds must be replaced with a supported release.
Driver
Driver initialization failed (Stage 1) — Error_InitDriver1
Restart Windows, ensure no game or launcher is running, and retry from a fresh extraction. If it repeats, send support a screenshot plus your Windows build.
Driver initialization failed (Stage 2) — Error_InitDriver2
Restart Windows and retry once from the official dashboard download. Check Windows Security → Protection history for a matching event and include it in your ticket.
Vulnerable driver list check failed — Error_VulnDriverList
Open Windows Security → Device security → Core isolation, turn Microsoft Vulnerable Driver Blocklist off, restart Windows, and retry.
Additional driver 1–8 initialization failed — Error_AdditionalDriver1 … Error_AdditionalDriver8
Restart Windows and retry from the latest loader once. If it repeats, send the exact code (e.g. Error_AdditionalDriver3) and a screenshot so the failing component can be identified.
Failed to start driver — Error_StartDriver
Restart Windows and retry once as administrator. Check Windows Security → Protection history for an event at the same time; if one exists, send the detection name and the exact loader error to support.
Driver mapping failed — Error_MapDriver
Restart Windows, close every game and launcher, then retry once with the latest loader. If mapping fails again, send support your Windows build and exact error.
Failed to stop driver — Error_StopDriver
Do not reopen the loader repeatedly. Restart Windows to clear the driver session, then use the latest loader once.
Service deletion failed — Error_DeleteService
Restart Windows to finish removing the temporary service, then retry once as administrator.
Files
Mutation failed (Stage 1/2) — Error_Mutation1 / Error_Mutation2
Delete the extracted loader folder, download the loader again from your dashboard, and extract every file into a new empty folder.
DLL download failed — Error_DownloadDll
Confirm other websites load, check the status page, and retry without a VPN or proxy. If the service is online but the download still fails, include your country and ISP in a ticket.
DLL decryption failed — Error_DecryptDll
The downloaded payload could not be opened. Delete the extracted folder, download a fresh loader from your dashboard, extract again, and retry. Never use a DLL from another source.
DLL allocation failed — Error_AllocateDll
Restart Windows, close memory-heavy apps and overlays. Ensure Windows virtual memory is set to System managed. Retry once, then send support your RAM amount and Windows build if it repeats.
DLL mapping failed (Stage 1/2) — Error_MappDll1 / Error_MappDll2
Restart Windows and follow the product's launch order exactly. Retry from a clean extraction; if it repeats, note whether the game was open when it appeared.
Driver write failed — Error_WriteDriver
Move the archive to a normal folder owned by your Windows account, extract it into a new folder, and run the loader as administrator. Avoid read-only, network, cloud-synced, or removable locations.
Hardware
Router MAC address retrieval failed — Error_RouterMAC
Connect through your normal physical Wi-Fi or Ethernet adapter, disconnect VPN and virtual network adapters, then restart the router and PC. Tell support whether you use Wi-Fi or Ethernet if it repeats.
CPU information retrieval failed — Error_CPUInfo
Press Win + R and open msinfo32. If the processor is missing there, repair Windows system information first; otherwise restart and send support the processor name shown in System Information.
GPU information retrieval failed — Error_GPUInfo
Open Device Manager → Display adapters and confirm your GPU appears without a warning icon. Install the current NVIDIA / AMD / Intel driver, restart, and retry.
Hardware ID length mismatch — Error_HWIDLenMismatch
Use the same PC and normal network adapter linked to the license, then restart and retry. If hardware or Windows was recently changed, request an HWID review with the order number.
Account
Access denied — Error_NoAccess
Confirm the purchase is visible in your dashboard and the license is active. Sign out of any other account, copy the correct key again, and contact support with the order number if access is still denied.
User validation failed — Error_User
Confirm you are using the account that owns the order and that the order appears in Dashboard → Keys. Copy the license from there again; include the order number in a ticket if validation still fails.
License key validation failed — Error_Key
"Either the License is Invalid or HWID Doesn't Match."
Copy the full license key from Dashboard → Keys with no added spaces. Confirm it matches the selected product; if the PC or Windows installation changed, request an HWID review with the order number.
Service
Success — ERROR_OK
The loader finished successfully. Continue with the exact launch instruction shown on screen.
Invalid cheat configuration — Error_InvalidCheat
Return to the product selection and choose the exact product attached to your key. If it is already correct, check its live status and send support the product name and selected loader number.
Cheat service is offline — Error_CheatOffline
The selected product is not currently available. Check its status page and wait until it returns online — downloading again or repeatedly retrying will not change an offline status.
Cheat status check failed — Error_CheatStatus
Check the product's live status and your internet connection. If online, close the loader, wait two minutes, and retry once without a VPN. Report the product and time if it repeats.
Connection Died — Error_ConnectionDied
The loader lost its connection. Check the status page, restart your router if other sites are unstable, and retry without a VPN or proxy. Include your country, ISP, and time in a ticket if it continues.
Windows 10 issues
Windows 10 has limited compatibility. If you experience persistent errors, upgrade to Windows 11 (23H2 or newer).
Support
Need help? Open a support ticket with:
- Product: Dead by Daylight Vendex External
- Order number
- Windows version and build (WIN + R → type
winver) - CPU / GPU
- Exact loader error message
- When it happened (during setup, injection, in-game)
- Steps already tried
- Screenshot of error
This helps the team diagnose your issue quickly without back-and-forth.