Crimson - setup guide

The complete step-by-step setup for Crimson on Rob Run. BIOS, Windows and the common errors. Download links are on your order page after the purchase.

Rob Run Crimson Internal Cheat

If you'd like to purchase it, you can do so from this link: Buy Now.

!Important!

If you are using external spoofer. Always run the cheat first and then the spoofer. If you run the spoofer first and then the cheat, you will get banned.


Internal

Internal products are better for performance.

Be careful

Product does not have spoofer. This means if you got banned you will get hwid banned.

You can purchase External Spoofer

If you want to purchase spoofer, you can do so from this link: Buy Now.

Required Files​

Download all required files before starting:

  1. Disable Windows Defender / Disable Anti-Cheat / Disable Antivirus Software
  2. Download Loader
  3. Visual C++ Runtimes
  4. DirectX End-User Runtime

Preparing Your Computer​

Complete these steps before launching the loader. Skipping any step is the most common cause of issues.

Step 1 — Disable Windows Defender​

  1. Download DControl (WinRAR password: sordum)
  2. Open DControl.exe
  3. Disable Windows Defender Real-Time Protection
warning

Windows Defender must be disabled every time before launching the loader. It resets after reboot.

Step 2 — Install Required Components​

Make sure the following are installed on your system:

Step 3 — Remove Conflicting Software​

The following must be fully uninstalled — not just closed:

  • FACEIT Anti-Cheat
  • Any third-party antivirus (Avast, Kaspersky, McAfee, ESET, Bitdefender, etc.)
danger

If FACEIT AC or a third-party antivirus is installed, the loader will not work regardless of other settings.

Step 4 — Game Graphics Settings​

  1. Launch Rob Run once without the cheat
  2. Go to Graphics Settings
  3. Set everything to Low
  4. Close the game completely

Low graphics settings improve stability and reduce the chance of crashes or freezes during injection.

Launching the Cheat​

Important

Make sure the game and launcher are fully closed before launching the loader.

Steps​

  1. Download and run the loader as Administrator
  2. Enter your license key
  3. Wait for the message: "Please Launch Rob Run And Press F2 In Main Menu"
  4. Launch Rob Run
  5. Once you're in the lobby, press F2 and wait 10–20 seconds

Controls​

ActionKey
Open / Close menuInsert
Inject in lobbyF2

Troubleshooting & Support​

About VPN

You only need a VPN while the loader connects and injects. Once the menu appears in-game, you can turn the VPN off and keep playing.

No Menu After Injection​

If the menu does not appear after injection, please check the following:

  • Make sure you press F2 while being in the game lobby
    • You should hear a beep sound
    • The menu may appear after 30–60 seconds while staying in the lobby
  • Make sure the following Windows protections are disabled:
    • Windows SmartScreen
    • UAC (User Account Control)
    • Windows Firewall
  • Ensure Driver Blocklist and Memory Integrity are disabled
  • Make sure you do not have any third-party antivirus installed
  • Make sure FACEIT Anti-Cheat is not installed on your system
  • Press F2 and check the loader message:
    • If it says Initialize Complete, the injection worked — continue with the steps below
    • If it shows any other message, open a ticket
  • Turn off all overlays from other programs (NVIDIA GeForce Experience, Discord, AMD Adrenalin, Steam, etc.)
  • Connect to a VPN and try again

Instant Crash on Game Launch​

  1. Install the latest GPU drivers (NVIDIA or AMD)
  2. Open System → Display → Graphics and disable:
    • Hardware-accelerated GPU scheduling
    • Variable refresh rate
    • Optimizations for windowed games
  3. Run CMD as Administrator and paste this command:
reg add "HKLM\SOFTWARE\Microsoft\Windows\Dwm" /v OverlayTestMode /t REG_DWORD /d 5 /f
  1. Disable Virtualization (Intel VT-x / AMD SVM) in your BIOS settings
  2. Restart your PC
  3. Try injecting again

Instant BSOD on Injecting​

Important

Do not use AI coding tools while the cheat is running, such as ChatGPT, Claude, Grok, or similar apps.

  1. Run CMD as Administrator and disable KPTI by pasting these commands one by one:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 3 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f
  1. Disable Virtualization (Intel VT-x / AMD SVM) in your BIOS settings
  2. Disable any RAM boost / overclocking profiles in BIOS (XMP tweaks, memory boost)
  3. Uninstall any RAM cleaner software
  4. Restart your PC

Error Codes​

Failed to initialize API (on loader start)​

The loader can't reach our servers — usually blocked by your ISP or region.

If the loader still cannot connect, see the Connection Fix and the Loader Download Fix.

  1. Close the loader
  2. Connect to a VPN (any country)
  3. Run the loader again as Administrator
  4. After a successful injection you can turn the VPN off

Driver Error 1 / Driver Error 2​

  • Uninstall FACEIT Anti-Cheat and Riot Vanguard

  • Disable Windows Defender via DControl

  • Remove all third-party antivirus software

  • Disable Memory Integrity (Core Isolation)

  • Disable Vulnerable Driver Blocklist

  • Restart your PC

Can't Handle Driver​

  1. Open Windows Security → App & browser control → Exploit protection settings
  2. Set every option to Use default
  3. Restart your PC

Failed to initialize 1 / Failed to initialize 2 (after pressing F2)​

The connection was interrupted during injection.

  1. Close the game and the loader
  2. Connect to a VPN (any country)
  3. Run the loader again, launch the game and press F2 quickly in the lobby
  4. Once the menu appears you can turn the VPN off

If you encounter any issues or have questions, you can open a ticket and request support assistance at any time. Our team will help you resolve your problem as quickly as possible.

Back to CrimsonGet help on Discord