Raven - setup guide

The complete step-by-step setup for Raven on Rob Run. BIOS, Windows and the common errors. Download links are on your order page after the purchase.

Rob Run Raven External Cheat

If you'd like to purchase it, you can do so from this link: Buy Now.

!Important!

If you are using external spoofer. Always run the cheat first and then the spoofer. If you run the spoofer first and then the cheat, you will get banned.


External

External products are better for undetection.

Be careful

Product does not have spoofer. This means if you got banned you will get hwid banned.

You can purchase External Spoofer

If you want to purchase spoofer, you can do so from this link: Buy Now.

System Requirements​

  • CPU: AMD and Intel supported
  • Windows: Windows 10 1903+ up to Windows 11 25H2
  • BIOS: Virtualization (VT-X / AMD-V) enabled
  • RAM: 16 GB or more

Required Files​

Download all required files before starting:

  1. Disable Anti-Virus
  2. Download Loader
  3. Visual C++ Runtimes
  4. DirectX End-User Runtime

Preparation Before Installation​

  • First launch may reboot your PC a few times. Open the loader again after each restart and continue.
  • Disable every security feature: Windows Defender, third-party antivirus, Secure Boot, and Windows password (if you use a spoofer).

Overlay Setup​

You need either Discord or Medal for the in-game overlay.

Option A — Discord​

  1. Download and install Discord
  2. Run Discord as Administrator
  3. Enable the in-game overlay in Discord settings
  4. Disable "Enable Legacy Overlay"
  5. If Discord shows "No suitable overlay", toggle the overlay off and back on

Option B — Medal​

  1. Download and install Medal
  2. Run Medal as Administrator
  3. To have better FPS in games, disable "Capture Clips" in Clip Settings
Display Mode

The game must be in Borderless or Windowed mode. Fullscreen is not supported.

Launch Instructions​

  1. Launch your overlay of choice (Discord or Medal, as Administrator)
  2. Run the loader. Keep focus on the monitor that will show the overlay.
  3. Paste your license key into the loader (Right Mouse Button to paste), then press Enter.
  4. Launch Rob Run once the loader CMD window closes
  5. Wait in the main menu until the software menu appears — this can take up to 3 minutes
  6. Menu key: Insert

Troubleshooting​

AES instruction set is not supported​

Your CPU does not support AES instructions, or AES is disabled in BIOS. Make sure AES is enabled in BIOS.

Please enable AHCI disk mode in BIOS​

Disable IDE / RAID mode or anything else that is not AHCI.

Please unload a third-party hypervisor​

Restart your PC. If that doesn't help, uninstall anything that uses a HyperVisor.

Failed to init render​

Disable integrated graphics in BIOS.

Failed to delete hvax.exe(1)​

Delete hvax64 manually.

Please disable Intel Rapid Storage Technology​

  1. Switch Windows from RAID/IDE to AHCI
  2. If IRST/RAID is already disabled, use DriverView or ProcessHacker to find and disable all drivers/services starting with iaStor

SPACES disk is present​

Disable Microsoft Storage Spaces in Control Panel → Storage Spaces. Warning: this may wipe all data on the disk.

Error 0x302​

Restart your PC and try again.

Intel VT-x / VMX / SVM is not supported​

Run PowerShell as admin and enter:

Set-ExecutionPolicy RemoteSigned

Then restart your PC and run these commands one by one in PowerShell (as admin):

takeown /F "C:\Windows\System32\hvix64.exe"
icacls "C:\Windows\System32\hvix64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):F
takeown /F "C:\Windows\System32\hvax64.exe"
icacls "C:\Windows\System32\hvax64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):F
del "C:\Windows\System32\hvix64.exe"
del "C:\Windows\System32\hvax64.exe"

Restart your PC.

Please enable Intel VT-X in the BIOS!​

Enable Intel VT-X in BIOS.

Please enable AMD-V (SVM) in BIOS!​

Enable AMD SVM in BIOS.

Failed to load dependencies​

Turn off / delete antivirus or FACEIT / Vanguard anti-cheat. Restart your PC and try again.

Incompatible HWID​

HWID check error or mismatch. Restart Windows and try again. If it doesn't work, request an HWID reset from support.

Unsupported NVIDIA driver version​

Update NVIDIA drivers via GeForce Experience or the NVIDIA App.

Failed to download font (-5)​

Download ArialUnicodeMS.ttf manually and place it in C:\Windows\Fonts, or use a VPN and let the loader download it automatically.

Failed to load dependencies (1)(-5)​

Restart PC. If it doesn't help, use a VPN.

Loader crashing 1–3 seconds after launch​

Install Visual C++ Redistributable.

Failed to spoof hardware identifier (0x4)​

Reboot your PC and try again. If it doesn't help, something else is already spoofing hardware identifiers — find and disable it.

Incorrect HWID​

Open CMD as administrator and run these commands one by one:

wmic diskdrive get Caption, SerialNumber
wmic baseboard get SerialNumber
getmac

If any command fails, try reinstalling Windows.

Failed to allocate / map memory​

  1. Ensure your PC has 16+ GB RAM
  2. Disable everything in Task Manager → Startup, restart, then try again
  3. Make sure the loader is on your local PC, not cloud storage (OneDrive, Mega.nz)
  4. Download AutoRuns and disable everything under Microsoft/Windows/CurrentVersion/Run

Either virtual or RAID disk is present​

Turn off virtual disk / RAID in BIOS and disable Intel Rapid Storage Technology. Find and disable services starting with iaStor. If that doesn't help, reinstall Windows.

Failed to download files (1)​

Try again. If it doesn't work, use a VPN. If that fails, reinstall Windows.

Endless reboots​

Disable the password on your Windows account and switch to a local account, then contact support.

MAPPER error​

Downgrade or upgrade your Windows version / build. If that doesn't help, use the original version of Windows.

No available servers were found​

Servers might be under maintenance. Otherwise, try a VPN.

Failed to init spoofer​

Use another available spoofer option (for example, if you are using EAC, switch to a different one).

Failed to attach to the game​

This is usually caused by conflicting overlays.

  1. Check the overlay apps on your PC and uninstall any unnecessary ones (RivaTuner, Medal, OBS Studio, Razer apps, ROG software, Wallpaper Engine, etc.)
  2. Disable the overlays of Steam, NVIDIA App and AMD Adrenaline
  3. Keep only the Discord overlay enabled, with "Enable Legacy Overlay" disabled

Support​

Need help? Contact support with:

  • Screenshot of the exact error
  • Windows version (WIN + R → type winver)
  • Processor type (Intel / AMD)
  • Steps already tried

Back to RavenGet help on Discord