Aventus - setup guide

The complete step-by-step setup for Aventus on Valorant. BIOS, Windows and the common errors. Download links are on your order page after the purchase.

Valorant Aventus Internal Cheat

If you'd like to purchase it, you can do so from this link: Buy Now.


Internal

Internal products are better for performance.

Built-in HWID Spoofer

The loader includes a built-in HWID spoofer, no separate spoofer is needed. See How to Use the Built-in HWID Spoofer.

Windows 11 26H1 is not supported

Check your Windows version with Win + R → winver.

System Requirements​

  • CPU Compatibility: INTEL + AMD (virtualization VT-x / SVM required)
  • OS: Windows 10 / Windows 11 (64-bit, not 26H1)
  • Supported Platforms: Riot Client
  • BIOS: Virtualization enabled, Secure boot disabled
  • BitLocker fully decrypted and Windows Hello PIN off
  • TPM 2.0 enabled and Core Isolation / Memory Integrity On

Required Files​

Download all required files before starting:

  1. Disable Windows Defender / Disable Antivirus Software
  2. Download Loader
  3. Visual C++ Runtimes
  4. DirectX End-User Runtime

Preparing Your PC​

Complete these steps before launching the loader. Skipping any step is the most common cause of issues.

1. Disable Windows Defender​

warning

Windows Defender must be disabled every single time before launching. It turns back on automatically after each reboot.

  1. Download and run DControl
  2. Click Disable Windows Defender Real-Time Protection
  3. Verify it shows as disabled in Windows Security

2. Remove Conflicting Software​

These must be completely uninstalled, simply closing them is not enough:

  • FACEIT Anti-Cheat
  • Any third-party antivirus: Avast, Kaspersky, McAfee, ESET, Bitdefender, Norton, or similar

If FACEIT AC or any third-party antivirus remains installed, the loader will not work.

3. BIOS Settings​

  1. Restart your PC and enter BIOS (F2 / F10 / DEL / ESC during startup)
  2. Find Virtualization (VT-x / SVM) and set it to Enabled
  3. Find Secure Boot (Boot or Security tab) and set it to Disabled
  4. Save and exit BIOS
danger

Secure Boot must be disabled. The loader will not function with Secure Boot enabled. Keep it off until you restart without the cheat.

4. Valorant Extra Requirements​

Valorant uses Vanguard, which has extra requirements:

  • TPM 2.0 must be Enabled in BIOS (fTPM on AMD, PTT on Intel, usually under Security or Advanced). Vanguard will not launch Valorant without it.
  • Core Isolation / Memory Integrity must be On in Windows: Windows Security → Device Security → Core Isolation Details → Memory Integrity → On. If the toggle is greyed out, update or remove the incompatible drivers Windows lists, or run bcdedit /set hypervisorlaunchtype auto in CMD (admin) and restart.

Launching the Cheat​

Step 1: Loader Setup​

  1. Download and open the loader
  2. Enter your license key
  3. Choose your seed (see spoofer section)
  4. Click Load
  5. Wait for your PC to reboot automatically

Step 2: After the Reboot​

  1. Your PC restarts on its own
  2. Once Windows loads, open your game
  3. Do NOT run the loader again, the cheat is already active
  4. Press Delete to open the in-game menu. Press it again to hide it.
FeatureDetails
PersistenceRuns until you restart your PC
Multiple LaunchesClose and reopen the game freely
No Loader NeededOnly run the loader again after a restart

After restarting your PC, run the loader again with your key, wait for the automatic reboot, then open your game.

How to Use the Built-in HWID Spoofer​

The loader has a built-in HWID spoofer that uses seeds to generate unique hardware identifiers. It is enabled by default.

Test mode

The spoofer is currently in test mode and may not work on every system. If the loader shows a spoofer error, contact support with your OS version and the exact message.

Running with the Spoofer​

  1. Choose your seed
  2. Press Load
  3. Done, the cheat and spoofer are loaded. No additional steps required.

Running without the Spoofer​

Uncheck the spoofer checkbox in Additional Settings (bottom-right corner of the loader). You must do this every time you load, it resets on each launch.

Seeds​

Each seed generates a unique set of hardware IDs. A Default seed is created automatically.

Create a new seed:

  1. Open the loader and go to the seed management section
  2. Click Create Seed
  3. Enter a name (e.g. your account name)

Create a new seed when:

  • You got banned and need a completely new set of hardware IDs
  • You switch accounts (use a different seed per account)
  • You want a fresh start

Delete a seed: select it in seed management and click Delete.

warning

Do not delete a seed while it is actively loaded. The Default seed cannot be deleted.

Quick Checklist​

  • Windows Defender disabled
  • Visual C++ Redistributable and DirectX Runtime installed
  • Conflicting software uninstalled
  • Virtualization enabled and Secure Boot disabled in BIOS
  • BitLocker fully decrypted, Hello PIN off
  • TPM 2.0 enabled and Memory Integrity On
  • Loader launched with key
  • PC rebooted automatically
  • Game opened

Troubleshooting​

Restart your PC after each fix, then run the loader again.

"Disable Hello PIN"​

Windows Hello PIN must be off, and the PC must not be signed in with a Microsoft account.

  1. Open Settings → Accounts → Your info
  2. Click Sign in with a local account instead and follow the prompts
  3. Open Settings → Accounts → Sign-in options
  4. Under PIN (Windows Hello), click Remove if it is still there
  5. Restart your PC

If Remove is greyed out, turn off "For improved security, only allow Windows Hello sign-in for Microsoft accounts" on the same page, then try again.

"Disable BitLocker"​

BitLocker must be fully decrypted, not just paused.

  1. Open Command Prompt as administrator
  2. Check the state of your drives:
manage-bde -status
  1. Turn BitLocker off for every drive that shows protection on:
manage-bde -off C:
manage-bde -off D:
  1. Decryption runs in the background and can take a while. Check progress with manage-bde -status C:
  2. Wait until every drive shows Conversion Status: Fully Decrypted and Percentage Encrypted: 0.0%
  3. Restart your PC
warning

"Protection Off" is not enough. Do not launch the loader until every drive says Fully Decrypted.

If a drive is locked and asks for a key, unlock it first: manage-bde -unlock D: -RecoveryPassword YOUR-48-DIGIT-KEY

"Disable Secure Boot"​

  1. Restart your PC and enter BIOS (F2 / F10 / DEL / ESC)
  2. Go to the Boot or Security tab
  3. Set Secure Boot to Disabled
  4. Save and exit BIOS

Loader doesn't open or disappears​

  • Windows Defender real-time protection must be off. It turns back on after every reboot, so disable it again with DControl each time.
  • If Defender already removed the loader, disable protection first and download the loader again.
  • Install Visual C++ Runtimes and DirectX End-User Runtime.
  • Make sure no third-party antivirus or FACEIT Anti-Cheat is installed. Closing them is not enough, they must be uninstalled.

PC doesn't reboot after Load​

  • Check that Virtualization is enabled in BIOS.
  • Check the three loader errors above: Hello PIN, BitLocker, Secure Boot.
  • Disable Defender again and run the loader once more.
  • Use the menu key: Delete.
  • Open the game after the automatic reboot, and do not run the loader again.
  • If you restarted your PC at any point, the cheat is no longer active. Run the loader again with your key.

Support​

Need help? Open a ticket and contact support with:

  • Your Windows version (WIN + R → type winver)
  • Steps already completed
  • Screenshot of the exact error from the loader

Back to AventusGet help on Discord