Crimson Internal - setup guide

The complete step-by-step setup for Crimson Internal on Wardogs. BIOS, Windows and the common errors. Download links are on your order page after the purchase.

Wardogs Crimson Internal Cheat

If you'd like to purchase it, you can do so from this link: Buy Now.

!Important!

If you are using external spoofer. Always run the cheat first and then the spoofer. If you run the spoofer first and then the cheat, you will get banned.


Internal

Internal products are better for performance.

Be careful

Product does not have spoofer. This means if you got banned you will get hwid banned.

You can purchase External Spoofer

If you want to purchase spoofer, you can do so from this link: Buy Now.

Required Files​

Download all required files before starting:

  1. Disable Windows Defender / Disable Anti-Cheat / Disable Antivirus Software
  2. Download Loader
  3. Visual C++ Runtimes
  4. DirectX End-User Runtime

Preparing Your Computer​

Complete these steps before launching the loader. Skipping any step is the most common cause of issues.

Step 1 — Disable Windows Defender​

  1. Download DControl (WinRAR password: sordum)
  2. Open DControl.exe
  3. Disable Windows Defender Real-Time Protection
warning

Windows Defender must be disabled every time before launching the loader. It resets after reboot.

Step 2 — Install Required Components​

Make sure the following are installed on your system:

Step 3 — Remove Conflicting Software​

The following must be fully uninstalled — not just closed:

  • FACEIT Anti-Cheat
  • Any third-party antivirus (Avast, Kaspersky, McAfee, ESET, Bitdefender, etc.)
danger

If FACEIT AC or a third-party antivirus is installed, the loader will not work regardless of other settings.

Step 4 — Game Graphics Settings​

  1. Launch Wardogs once without the cheat
  2. Go to Graphics Settings
  3. Set everything to Low
  4. Close the game completely

Low graphics settings improve stability and reduce the chance of crashes or freezes during injection.

Launching the Cheat​

Important

Make sure the game and launcher are fully closed before launching the loader.

Steps​

  1. Download and run the loader as Administrator
  2. Enter your license key
  3. Wait for the message: "Please Launch Wardogs And Press F2 In Main Menu"
  4. Launch Wardogs
  5. Once you're in the lobby, press F2 and wait 10–20 seconds

Controls​

ActionKey
Open / Close menuInsert
Inject in lobbyF2

Troubleshooting & Support​

About VPN

You only need a VPN while the loader connects and injects. Once the menu appears in-game, you can turn the VPN off and keep playing.

Instant Crash on Game Launch​

  1. Install the latest GPU drivers (NVIDIA or AMD)
  2. Open System → Display → Graphics and disable:
    • Hardware-accelerated GPU scheduling
    • Variable refresh rate
    • Optimizations for windowed games
  3. Run CMD as Administrator and paste this command:
reg add "HKLM\SOFTWARE\Microsoft\Windows\Dwm" /v OverlayTestMode /t REG_DWORD /d 5 /f
  1. Disable Virtualization in your BIOS settings
  2. Restart your PC
  3. Try injecting again

Failed to initialize API (on loader start)​

The loader can't reach our servers — usually blocked by your ISP or region.

If the loader still cannot connect, see the Connection Fix and the Loader Download Fix.

  1. Close the loader
  2. Connect to a VPN (any country)
  3. Run the loader again as Administrator
  4. After a successful injection you can turn the VPN off

Failed to initialize 1 / Failed to initialize 2 (after F2)​

The connection was interrupted during injection.

  1. Close the game and the loader
  2. Connect to a VPN (any country)
  3. Run the loader again, launch the game and press F2 quickly in the main menu
  4. Once the menu appears you can turn the VPN off

Driver Error 1 / 2​

To fix these driver initialization errors, disable conflicting security features and anti-cheats:

  • Disable HVCI (Memory Integrity)
  • Disable Microsoft Vulnerable Driver Blocklist
  • Disable Windows Defender using DControl
  • Delete Riot Vanguard and FACEIT AC

Can't Handle Driver​

If you encounter this error during injection:

  • Go to Windows Security settings and set all Exploit Protection settings to Default.

No Menu After F2​

  1. Press F2 and check the loader message:
    • If it says "Initialize Complete" — proceed to the next step
    • If it shows an error — contact support
  2. Turn off all background overlays from other programs (NVIDIA GeForce Experience, Discord, AMD Adrenalin, etc.)
  3. Connect to a VPN and try again

BSOD After F2​

Important

Do not use AI coding tools while the cheat is running, such as ChatGPT, Claude, Grok, or similar apps.

If your PC crashes with a Blue Screen of Death after pressing F2, disable KPTI.

Run CMD as Administrator and paste the following commands one by one:

reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 3 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f

Then:

  1. Disable Virtualization (Intel VT-x / AMD SVM) in your BIOS settings
  2. Disable any RAM boost / overclocking profiles in BIOS (XMP tweaks, memory boost)
  3. Uninstall any RAM cleaner software
  4. Restart your PC and try injecting again

If you encounter any issues or have questions, you can open a ticket and request support assistance at any time. Our team will help you resolve your problem as quickly as possible.

Back to Crimson InternalGet help on Discord